Patient Monitor

Patient Monitor

JERRY-I handheld patient monitor

Function:

 All-in-one designed module with 5 standard parameters: ECG, NIBP, SPO2, Pulse Rate and Temperature. 

 Optional parameter: ETCO2

 This machine can meet all requirements, and meet requirements of hospital & other departments in emergency treatment, first-aid, rescue,etc.

 Touch screen, 5.0 inch color TFT LCD, simple for operating, quickly & accurately measure the data;

 Build-in rechargeable Li-battery(7200mAh 3.7V), up to 15hours running time, support AC and DC power;

 Adjustable audible and visual alarms, and sensor off alarm;

 Long time monitoring and sleeping monitoring;

 Easy to carry, suitable for ambulance center, has the stand for fixing;

 Storage and review data up to 9999 user ID and 3888groups via Trend Graph and Trend List.

 Bluetooth data upload to Android mobile

 Big font screen interface is easy to observe;

 Back light can be adjusted


Share:

INTRODUCTION

Specification:

1. General Specifications:

Size: 209mm×104mm×47.5mm

Net Weight: 655g

Display Specification

Measurement Display: color TFT- LCD/touch screen

Power Supply Indicator: Dual-color LED (red/green)

Charging indicator: A green LED

2. Power Supply

AC Power Adaptor

Input: 100~240V AC, 50/60Hz, 0.7A

Output: DC 5V, 2A

Battery

Li-ion rechargeable battery, 3.7V/7200mAH

Operating Time: 15 hours with full battery capacity.

(Condition: 25℃, NIBP working period is 15 minutes)

Recharge Time: 10 hours.

3. Environment

Temperature

Working:0℃~45℃

Transport and Storage: -25℃~85℃

Humidity

Working:30%~85 %

Transport and Storage: 30%~95 % (no condensation)

4. Monitoring Parameter

ECG

Input:5-lead ECG cable, standard AAMI cable connector

Lead Selection:I,II,III, avR,avL,avF,C

Gain Selection:×1,×2,×4,×8

Sweep Speed: 12.5, 25, and 50 mm/s

Frequency Response: None filter: 0.05~100Hz (-3dB), filter: 0.5~40Hz (-3dB)

Calibration Signal: 1mV square wave

Heart Rate

Measuring Range: 20 bpm~300 bpm

Renew Time: 1 time per beat

Accuracy:±1 bpm

Alarm Mode: Audible and visual alarm

SpO2

SpO2%

Measuring Range:0%~100%

Resolution:1 %

Accuracy:±2 %(90%~99%), ±3 %(70%~89%),unspecified (0%~69%)

Pulse Rate

Measuring and Alarm Range:20~300bpm

Resolution:1bpm

Accuracy:±1bpm

NIBP

Method: Oscillometric

Mode: Manual, Auto, STAT

Measuring Interval in AUTO Mode: 1, 2, 3, 5, 10, 15, 20, 30, 45, 60 (min)

Measuring Period in STAT Mode: 5 min

Cuff Pressure Range:0 mmHg~300mmHg

Pulse Rate Range:30 bpm~250bpm

Measurement Rage: Adult 30 mmHg~255mmHg, Pediatric 30 mmHg~160mmHg

Over-pressure Protection: Adult 300mmHg, Pediatric 220mmHg

Pressure Resolution: 1mmHg

The SYSTOLIC and DIASTOLIC values measured using this device shall be equal to those measured by trained medical personnel using cuff and stethoscope. The MAP value measured using this device is equal to that measured using blood pressure measurement device.

Temperature

Input: Body surface thermal-sensitive resistor temperature sensor

Measuring Range: 0℃~50℃

Accuracy: ±0.1℃

EtCO2(Optional)

Measuring Range: 0~150mmHg

Resolution: 1 mmHg

Accuracy: ±2mmHg@< 5.0% CO2

Respiration Rate(Optional)

Measuring Range: 0~120rpm

Resolution: 1rpm

Accuracy: ±1rpm

5. Storage and Review

Maximum Data Quantity: 3888 groups

Maximum Trend Time: Continuous 129.6 hours


Certifications

Our factory

Main markets

FAQ

Q: Is it certificated?

Yes, it is with CE certificated.


Q: Whats your payment terms?

We accept payment by T/T, Western Union, Paypal, L/C, Trade Assurance etc.


Q: Shipping way:

By express, by air, or by Sea


Q: Can you do OEM?

Yes, we can do OEM. We have complete facilities and more than 20 years experiences ready for your service.


Q: How does your factory do regarding quality control?

We have standard QC system to control the quality.


Q: How can get the shipping cost?

You tell us your destination port or delivery address, we check the Sea Freight or Air Freight for you based on your requirement.


Q: Do you test all your goods before delivery?

Yes, we have 100% test before delivery.


Q: Is it all right to make customers’own brand name?

That’s all right to make your own brand name.


Q: How long time warranty do you have?

We offer two-year warranty for the main unit and and accessories. And we have the professional service engineer to respond your service request within 24h.


Customer reviews

Contact Us

+86 159 3335 6850

+86 159 3335 6850

vicky@meierketech.com

NO.112 Qinhuang West Street, Economic & Technical Development Zone,Qinhuangdao, Hebei Province, PEOPLE'S REPUBLIC OF CHINA

Stay in Touch

Get the latest on sales, new releases and more!

Follow Us

Copyright © Qinhuangdao Meierke Technology Co., Ltd. All Rights Reserved | Sitemap
Powered by