Spirometer

Spirometer

Sp100B Tabletop Portable Spirometer

 Introduction 

The Spirometer is a portable device for testing pulmonary function, it adopts differential pressure acquisition principle to measure over 100 parameters related to FVC, VC, MVV and MV functions. It can be used in many scenarios, such as hospital, clinic, family, MVV and provocation test before / after medication, etc. which can provide the test results of pulmonary function for the users and the basis for the medical staff to make diagnosis.

 Features 

 Beautiful appearance, concise and fashion.

 Desktop design, firm and convenient to operate.

 10.1" capacitive touch screen.

 Measure over 100 parameters related to FVC, VC, MVV and MV functions.

u Key selling points

 The test report can be printed and output by the built-in 210mm thermal printer.

 Wi-Fi function.

 Built-in ID card reader (optional).

With the functions of QC rating, calibration verification, bronchial dilation or provocation test, pulmonary function assessment, follow-up questionnaires, etc.

 Patient information can be entered, the predicted value can be calculated by the internal formula, and the ratio of the measured value and the predicted value can be calculated. Several predicted value formulas are optional.

 


Share:

INTRODUCTION

Function

1) Differential pressure detection technology, with a professional lung function software, which can measure over 100 parameters related to FVC, VC, MVV and MV functions.

2) Measure inspiratory and expiratory parameters, real-time curve display.

3) BTPS correction function, measure temperature, humidity and barometric pressure automatically.

4) Quality control function, automatic QC rating.

5) Calibration control function: volume calibration, three flows verification.

6) Display the optimal value from many measurements.

7) The tester condition can be reflected by the ratio of the measured value and the predicted value.

8) Flow-volume and volume-time curve

9) Data memory, delete and information review functions.

10) Trend chart display.

11) Prompt functions for over-limit of volume and flow.

12) Rechargeable lithium battery, with charging prompt.

13) Battery power indication.

14) Built-in multiple predicted values.

15) Support bronchial dilation / provocation test. 

16) Pulmonary function assessment.

17) Follow-up questionnaires function.

18) Patient information can be entered, managed and queried.

19) The test report can be printed and output by the built-in 210mm thermal printer.

20) The external printer can be connected to print and output the test report.

21) 10.1" capacitive touch screen.

22) Wi-Fi function.

23) Built-in ID card reader (optional).


FEATURES

  Performance

 Display mode: 10.1" color LCD

 Display resolution: 1280 * 800

 Volume range: 0 L ~ 10 L (BTPS)

 Volume accuracy: ± 3 % or ± 0.05 L (whichever is greater)

 Flow range: 0 L/s ~ 16 L/s (BTPS)

 Flow accuracy: ± 5 % or ± 0.17 L /s (whichever is greater)

 Power consumption: P ≤ 150 V·A

 Power supply: DC 14.8 V rechargeable lithium battery or AC220V 50Hz

 Safety class: class I or internally powered equipment, type BF applied part

Accessories 

 A pulmonary function probe

 A User Manual

 100 mouthpieces (round: 50, flat: 50)

 A cord set

 A recording paper

 An earth line

 A nose clip (optional)

Detailed introduction

Physical characteristic

Dimension: 340 mm (L) × 320 mm (W) × 86 mm (H)

Weight: about 4000 g

3.6 Environment requirements

Operating environment

Temperature: + 10 ℃ ~ + 40 ℃

Relative humidity: 25 % ~ 80 %

Atmospheric pressure: 700 hPa ~ l060 hPa

Specific EMC, climate, mechanical environment: 

u Please use the device within the required altitude, temperature and humidity range. When the device is carried from cold environment to warm or humid environment, please do not use it immediately.

u Do not use the device in environment with strong electromagnetic interference, direct breeze source, cold source or hot source.

Storage environment:

Temperature: - 20 ℃ ~ + 55 ℃ 

Relative humidity: ≤ 95 %

Atmospheric pressure: 500 hPa ~ l060 hPa

Specific EMC, climate, mechanical environment: the packed device should be stored in room with no corrosive gases and good ventilation. Temperature: - 20 ℃ ~ +55℃, relative humidity: ≤ 95 %. During transport, avoid strong shock, vibration and splashing with rain or snow.


Certifications

Our factory

Main markets

FAQ

Q: Is it all right to make customers’own brand name?

That’s all right to make your own brand name.


Q: Is it certificated?

Yes, it is with CE certificated.


Q: Can you do OEM?

Yes, we can do OEM. We have complete facilities and more than 20 years experiences ready for your service.


Q: How does your factory do regarding quality control?

We have standard QC system to control the quality.


Q: How can get the shipping cost?

You tell us your destination port or delivery address, we check the Sea Freight or Air Freight for you based on your requirement.


Q: Do you test all your goods before delivery?

Yes, we have 100% test before delivery.


Q: How long time warranty do you have?

We offer two-year warranty for the main unit and and accessories. And we have the professional service engineer to respond your service request within 24h.


Q: Whats your payment terms?

We accept payment by T/T, Western Union, Paypal, L/C, Trade Assurance etc.


Q: Shipping way:

By express, by air, or by Sea


Customer reviews

Contact Us

+86 159 3335 6850

+86 159 3335 6850

vicky@meierketech.com

NO.112 Qinhuang West Street, Economic & Technical Development Zone,Qinhuangdao, Hebei Province, PEOPLE'S REPUBLIC OF CHINA

Stay in Touch

Get the latest on sales, new releases and more!

Follow Us

Copyright © Qinhuangdao Meierke Technology Co., Ltd. All Rights Reserved | Sitemap
Powered by